Eric, Randy and all,
I had scanned a near perfect MLS LBI that had notes for connections when used for a link radio. I forwarded them to John N5NWC and he sent them to Kevin. I think I had sent you a copy also Eric. I'll resend them and to you also Randy if you send me an address. Mycall at mycall dot com for me. One note on the MLS, when you lose power they don't come back on automatically, that lbi has a mod (short) noted that powers it back up for you. 73, Don Kirchner- W5DK From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Lemmon Sent: Saturday, September 01, 2007 7:35 AM To: [email protected] Subject: RE: [Repeater-Builder] GE MLS To Controller Randy, Although the MLS is nice radio, the fact that it is programmed with a PROM makes it a bit inconvenient to use. The rear connector pinout is on page 14 of 16 (LBI page 10) in LBI-31764A, available here: <www.repeater-builder.com/ge/lbi-library/lbi-31764a.pdf> All of the MLS (aka MLS I) LBIs are available in the LBI Master Index, although some are of poor quality due to being reproduced from microfiche. Any readers having clean and complete hard copies of any MLS LBIs that they will lend for high-res scanning, please contact me directly at mycall at verizon dot net. 73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> [mailto:[email protected] <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of Randy Sent: Saturday, September 01, 2007 4:40 AM To: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> Subject: [Repeater-Builder] GE MLS To Controller Hi Group anyone using a GE MLS as a link radio or anything else repeater related I need a pinout of the radio to a controller. Which pin on the mike plug goes where, Thanks Randy
