Paul, Prior to putting up our DB224 we coated the connections with a commerical coating for antennas. It was from a local broadcast station who uses it. Not sure if same 3M product you mentioned. It was gold in color and really stands out on the antenna. This has been done on a number of exposed dipoles like the DB408s here and it last less than 10 years, some as short as 6 years.
I like the DB224, but do not trust it for the salt air and will go with a RFS/Cel Wave 200 with both a bottom and top bracket. Another problem with these is with mounting only at the bottom and they do not like waving the wind. We had another UHF system install a new one and from the start static when windy. A top bracket solved the problem...this goes back about 4 years and it is still in service and is about 1/2 mile from the salt water. We did the same for the DB224 install. Thanks for the info. I am sure many here can use the experience and advice. 73, ron, n9ee/r >From: Paul Finch <[EMAIL PROTECTED]> >Date: 2007/09/02 Sun PM 04:55:00 CDT >To: [email protected] >Subject: [Repeater-Builder] DB224 Survival in Florida >Ron and Eric, > >I emailed this out before, here goes again. I learned all I know about the >DB antennas from two of the engineers that designed the antenna many years >ago. My Boss at the time was a personnel friend of one and the other ended >up at Wacom where I did a lot of business with him. I have a lot of respect >for both. > >First, when you get a DB folded dipole antenna, disconnect all connections >at the dipoles and tighten everything and put it back together. After that, >put as many coats as you can of Scotchkote from 3M on every connection, >especially if dissimilar metals are present. Coat every knot, terminal and >joint on the antenna with Scotchkote that you can. Coat the whole thing if >you can. That keeps the salt from getting to those parts. Do this and the >antenna will last much longer and outlive the fiberglass antennas every >time. > >I was Director of Field Engineering for a nationwide paging company, we had >a office in Tampa Florida and all we used were the DB-224 antennas. I >threatened to fire anyone that put an antenna in the air without tightening >the connections and sealing it first. Never had to fire anyone over that, >they knew how important it was to me. > >We still had a few problems mainly from the first batch of Phelps Dog (Dodge >aka Celwave aka RF Industries or whatever they call themselves now) antennas >we put up. The difference between the folded dipole antenna and fiberglass >radome antennas in lightning was not worth the chance in a emergency system. > > >Hope this helps, >Paul > Ron Wright, N9EE 727-376-6575 MICRO COMPUTER CONCEPTS Owner 146.64 repeater Tampa Bay, FL No tone, all are welcome.
