So after reading the writeup about how the R1 audio squelch works I discovered that it, like the micor, adjusts the COR dropout time depending on the received signal strength... I think I read that it adds 150 ms for weak signals. I don't have any good documentation (other than schematics) on how the squelch gate card works... does it too do this?
Jesse On 9/2/07, Jesse Lloyd <[EMAIL PROTECTED]> wrote: > > Sounds good, thanks! > > Jesse > > On 9/2/07, Eric Lemmon <[EMAIL PROTECTED]> wrote: > > > > Jesse, > > > > I have the info for that module, and I will scan it and send it to you > > directly. > > > > 73, Eric Lemmon WB6FLY > > > > > > -----Original Message----- > > From: [email protected]<Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected]<Repeater-Builder%40yahoogroups.com>] > > On Behalf Of Jesse Lloyd > > Sent: Sunday, September 02, 2007 3:50 PM > > To: [email protected]<Repeater-Builder%40yahoogroups.com> > > Subject: [Norton AntiSpam] Re: [Repeater-Builder] MSR 2000 R1 Audio > > Squelch > > > > Its a TRN 9689 > > > > On 9/2/07, Eric Lemmon <[EMAIL PROTECTED] > > <wb6fly%40verizon.net><mailto:[EMAIL PROTECTED]<wb6fly%40verizon.net>> > > > > > wrote: > > > > Jesse, > > > > What number is stamped in black ink on your card? I'll see if I can > > dig up > > the data. I see at least seven different A&S cards used in the > > MSR2000 > > station. > > > > 73, Eric Lemmon WB6FLY > > > > > > > > > > -----Original Message----- > > From: [email protected]<Repeater-Builder%40yahoogroups.com> > > <mailto:Repeater-Builder%40yahoog roups.com> > > [mailto:[email protected]<Repeater-Builder%40yahoogroups.com> > > <mailto:Repeater-Builder%40yahoog roups.com> ] On Behalf Of Jesse Lloyd > > Sent: Sunday, September 02, 2007 2:36 PM > > To: [email protected]<Repeater-Builder%40yahoogroups.com> > > <mailto:Repeater-Builder%40yahoog roups.com> > > Subject: [Repeater-Builder] MSR 2000 R1 Audio Squelch > > > > Hey Guys, > > > > The schematic on the website of this card doesn't have the Intercom > > switch/button on it. From what I've read there are 2 versions of > > this > > board, the one published on the site and the one I have. The boards > > appear very similar, mine just has a few extra parts on it for more > > features I assume. > > > > What does this botton do? > > > > Jesse > > > > > > > > > > > > > > > > > > > >
