Re: Spectrum Communications SCR 77 UHF repeater You might have asked for a few more opinions before you bought a specific controller. Replacing the internal controller is quite a bit more involved versus dealing with just the CW ID'er function using something like an ID-O-Matic unit.
Do you want to interface the entire controller into the SCR-77 or just replace the CW ID'er function? Maybe the folks at MCC will/should have the connection information available? Our technical replies depend on how you want to interface the board to the repeater operation. There is a rear panel interface jack on the SCR-77 for use external controller connections. cheers, skipp > "wd4chs" <[EMAIL PROTECTED]> wrote: > Well after all the advice I bought a Controller for my Spectrum > SCR-77. It is an RC-100 from Micro Computer concepts. Nice > people there. Now...I have to figure out how to hook it up. I > am no tech, but I know a little bit. I would first just like it > to replace the old IC77 CWID board and let the RC-100 do the > IDing for me. Any thoughts on how to get this going? > Thanks, > Tim > --- In [email protected], "wd4chs" <taw21@> wrote: > > > > I am in need of or someone who knows anything about the CWID for a > > Spectrum SCR-77 UHF repeater. The CWID it has now functions good > > only it is not my call. From what I have read about this CWIDer > > you have to have the manufacturer "burn" a chip for you that > > plugs into the board. Is there any other way? > > > > Thanks, > > Tim WD4CHS > >
