I want to use the thing as a battery charger at a repeater site. The supply does not appear to have a current limiting circuit to limit the transformer temperature in cases where the battery can draw too much current due to a shorted cell or a "stone dead" situation. I want to provide that feature.
I also want the output set at a 12V battery float voltage of 13.4 - 13.6 volts, and have the ability to adjust the output up to about 14.7 volts, the so-called absorption charge voltage. So tell me how to get a copy of your schematic. Anything you can tell me about unreliability would also be welcome, but I suspect the voltage regulator and/or lack of current limiting may be the root cause of the issues you mentioned. Lou Aiken <[EMAIL PROTECTED]> LaMer LLC N4SWR 27109 Palmetto Drive Orange Beach, AL 36561 USA Tel ++ 1 251 981 6786 Fax ++ 1 251 981 3054 cell ++ 1 251 979 4648
