Well, This is what we have
* Kenwood TKR-750 repeater (On port 1, with Custome 25-15 Cable)
* Cat 400 Controller
* Port 2 setup with COS Low UHF Linking Radio
* Port 3 setup with COS Low UHF Linking Radio
We are having some difficulty in trying to figure out the right
configuation, required in the Kenwood repeater, to work with the linking
radios . I would assume that we should have the following set.
Use your KPG software and look under: Edit -> Optional Features -> AUX
Output
Set the function of AIO5 to TOR and Probably set the Logic Type to LOW.
Dip switch settings are set 1,3,5 to 'ON' and 2,4 set to 'OFF'
My question is using the default settings of the cat 400 controller, in
using the cat 400 codes: What would a user do to turn on say Port
2.......
IE: 200D or what, doesn't seem to explain this in the manual, or my eyes
are just too heavy....
Port 1 ='100
Port 2='200
Port 3='300
Port 4='400
DTMF Access Number='325
DTMF Pad Test='375
Voice Demo Control ='700
Forced DTMF Code ='D
DTMF Muting Override ='#
Any help or suggestions very much appreciated
73's
Randy Molyneaux (VE5RJM)
