Also---Just FYI* I will be submitting articles to RB on hooking up a TS-64 toneboard to an MSR-2000. Say hasta la swago to reeds...
I also plan on doing a real down and dirty guide on interfacing to the analog MSF-5000... George Henry wrote: > > > There are several articles on converting an MSR-2000 to amateur repeater > service on the Repeater-Builder website, under the Motorola > Mitrek/MSR-2000 pages, that include pinouts for connecting an external > controller. Take a look at: > > http://www.repeater-builder.com/msr2k/msr2k-conversion-k4hal.html > <http://www.repeater-builder.com/msr2k/msr2k-conversion-k4hal.html> and > > http://www.repeater-builder.com/msr2k/msr2k-conversion-w0dod.html > <http://www.repeater-builder.com/msr2k/msr2k-conversion-w0dod.html> > > I think you'll find all you need there. > > George, KA3HSW / WQGJ413 > > -----Original Message----- > >From: atms169 <[EMAIL PROTECTED] <mailto:aaron%40platinum.ca>> > >Sent: Oct 24, 2007 1:34 AM > >To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > >Subject: [Repeater-Builder] Motorola MSR2000 + NHRC-5 > > > >Hey guys. I have a question on schematics or a wiring diagram. > > > >I need to wire up an NHRC-5 Controller to an old RCMP VHF Motorola > >MSR-2000 (40 Watt version). > > > >I was going to wing it, thinking I could go through the squelch gate > >but, I would rather look for some information. Has anyone done this > >with this particular repeater? > > > >Any help appreciated. > > > > > > -- Jay Urish W5GM ex. KB5VPS ARRL Life Member Denton County ARRL VEC N5ERS VP/Trustee Monitoring 444.850 PL-88.5 146.92 PL-110.9
