last ones I got from radio shack. They may still have some if you can get the salesman to stop trying to sell you a cell phone long enough!
Mike KA2NDW -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Mike Morris WA6ILQ Sent: Thursday, November 01, 2007 5:42 PM To: [email protected] Subject: [Repeater-Builder] "Motorola" antenna adapter part number needed Years ago the standard scanner radio antenna connector was the so-called "Motorola car radio" connector. It was a metal cylinder maybe 1/4" in diameter with a protruding center pin. Does anybody know of a commercial source of a male "Motorola" connector to BNC female adapter? Alternatively an SO239 female? I'm trying to put a couple of older scanners back into service - one is going to a new ham, one is going to a friend's repeater as a NOAA weather channel receiver. Both need to have external antennas added to them. Yes, I could butcher the radio and install a BNC female, but I thought I'd see if I could buy a couple first. Mike WA6ILQ
