Lookee here: http://www.repeater-builder.com/badconn/
> -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of Steve > S. Bosshard (NU5D) > Sent: Wednesday, November 21, 2007 2:13 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Re: Ailing Wacom 220Mhz Duplexer > > See if the screw in side connecting pin on the TEE is loose - > glad you > found it. I have had a type N tee with a loose connection where the > side pin screws into the other pin. sb > > Keith, KB7M wrote: > > Just an update on the status of this project. I thought what I've > > found might be interesting to the group. > > > > At the suggestion of a group member, I removed the top and > side ports > > to the cavity. It turns out that this is quite easy to do. You just > > remove the three screws holding the top port, and the nut > holding the > > side port. At this point the whole assembly lifts out easily. I > > inspected the assembly and could see no problems. I resoldered the > > > > > > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.503 / Virus Database: 269.16.2/1143 - Release > Date: 11/21/2007 10:01 AM > > >
