Hi All, I am looking for a simple circuit that I could use to connect either 2x RX's or 2x TX's onto 1 port of my controller. Reason, I am dealing with a split site repeater. So I don't want to waste a port for half a system, that I could use for another use. I was then thinking about using the linking port to run the radio as required, and include a switch to switch in or out the radio. I am using a Link Comm RLC-3 controller, ports are nearly all filled up, that's why I am trying to save the port.
Radio A (Link) RX -----------
---------------- Radio A (Link) TX
|
|
|---------Input to controller / Output
from Controller --------
| from site 1
from site 2 |
Radio B (1/2 split) RX--X---
--------X--------- Radio B (1/2 split) TX
X = switch to switch out the Split site repeater.
Can I ask for some views on this, and any circuit/s that may help, even if I
only get the audio lines working, this would be a help.
Regards
Kevin.
Get Skype and call me for free.
sparc_nz
Description: Binary data
