Email me direct and I'll send you copies of the just made GE 
MVP files...  I don't see your full Email address by reading 
posts on the web. 

skipp 


> "Eric Lemmon" <[EMAIL PROTECTED]> wrote:
>
> Skipp,
> 
> Right at the beginning of the GE Master Index, you'll find Publication
> Indexes PC08 for the Custom MVP Mobile and PC15 for the 5 watt LPI (Low
> Power Industrial) MVP mobile.  In each of these documents one can find a
> nearly-complete listing of the LBIs that apply to each model MVP.  I
use the
> term "nearly-complete" because the LBI listed therein may be a cover
sheet
> of two pages that lists three or more other LBIs- which are not
identified
> in the Publication Index.  A long time ago, Mike Morris and I decided to
> break each of the module LBIs away from the cover sheets, to avoid
having
> the same LBI duplicated in several places.  For example, the same
> receiver-mixer is used in Mastr II, Mastr Executive II, and Custom MVP
> radios; there's no point in sticking the same LBI with each cover
sheet, and
> it's a huge waste of server space.
> 
> I'm curious- what is the model or combination number of the 5-watt MVP
> repeater you're documenting?
> 
> You have provided the "radio community" a great service with your
scanned
> manuals.  Thanks to you, I was able to find the exact manual for a TPL
> amplifier that I bought NOS from a broker.  You get a gold star for
all your
> hard work!
> 
> 73, Eric Lemmon WB6FLY
>  
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[EMAIL PROTECTED] On Behalf Of skipp025
> Sent: Monday, December 03, 2007 3:30 PM
> To: [email protected]
> Subject: [Repeater-Builder] Re: GE MVP Manual Scans now Available
> 
> Hi Eric, 
> 
> Some times the obvious things are not... 
> 
> Three or four people have asked me about the MVP Manual download 
> on my sonic page. I had not completed the manual scan so the link 
> doesn't work... yet. 
> 
> I sent a few of the people over to the RB Web Page to look and no 
> one reported finding the desired MVP manual. I myself also took a 
> brief tour of the GE Page and of course missed the LBI Section. 
> So to complete my requirements I scanned the UHF MVP 5-Watt 
> Repeater Manual I have here. 
> 
> I just went over to see the page(s) you mentioned below. Sometimes 
> different web page formats are not so easy for some of us to sort 
> through quickly. I see a lot of manual downloads listed but it's 
> still not "intuitive" for myself and a few others to find what we 
> were searching for. (Sorry MSF-Bob, I did try)
> 
> Anyway, what I scanned is the 5 Watt MVP Repeater Manual into 
> easily sorted sections. 
> 
> Working from Memory 
> 
> GEMVP1 MVP Main Manual Front Section 
> GEMVP2 MVP Exciter and 5 watt rf power amplifier
> GEMVP3 MVP Receiver 
> GEMVP4 MVP Receiver and Misc Options 
> GEMVP5 SAS Board 
> 
> Some extra pages were scanned onto the end of the GEMVP5 file so make
> a note the last few pages of that file are to be discarded. 
> 
> Also some scans of the Parkinson MVP Repeater Controller and 
> matching Phelps Dodge (flat-pack) Duplexer. 
> 
> I support any means folks can use to obtain the information they're 
> looking for. 
> 
> cheers, 
> skipp 
> 
> > "Eric Lemmon" <wb6fly@> wrote:
> >
> > Skipp,
> > 
> > I hope you're not spending time duplicating the LBIs that are already
> > available on the GE Master Index here:
> > 
> > <www.repeater-builder.com/ge/lbi-master-list.html>
> > 
> > At last count, there are 35 GE LBIs that are specific to the MVP
mobile
> > radio, that have already been scanned. The very few that we don't have
> > available for download are mostly for oddball bands like the 44 and 45
> > (66-88 MHz), plus a few in the 92 (800 MHz) band. The demand for
> LBIs in
> > those bands is almost non-existent.
> > 
> > Here's a list of MVP LBIs that we'd like to get hard copies of for
> full-page
> > scanning:
> > 
> > 30150
> > 30161
> > 30162
> > 30513
> > 30514
> > 
> > 73, Eric Lemmon WB6FLY
> > 
> > 
> > -----Original Message-----
> > From: [email protected]
> <mailto:Repeater-Builder%40yahoogroups.com> 
> > [mailto:[email protected]
> <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of skipp025
> > Sent: Monday, December 03, 2007 12:36 PM
> > To: [email protected]
> <mailto:Repeater-Builder%40yahoogroups.com> 
> > Subject: [Repeater-Builder] GE MVP Manual Scans now Available
> > 
> > GE MVP Manual Scans now Available 
> > 
> > Standing at the copy machine is like watching paint dry... 
> > really no fun. But within the last week, three people have 
> > asked me for the GE MVP Manual Copies I have listed (but not 
> > yet available) on the sonic web page. 
> > 
> > So I did the deed and the GE MVP Manual Scans are now 
> > made. I've sent copies of the scans to Mike and Kevin 
> > for the RB GE Pages. If you really can't wait you could 
> > email me direct and I'll forward copies direct (as time 
> > allows). 
> > 
> > cheers, 
> > skipp 
> > 
> > skipp025 at yahoo.com
> >
>


Reply via email to