I had similair problems when I tried to interface mine to a NHRC controller. My solution was to call the local Motorola dealer where I bought it from and tell him the two controlers would not play together. ( The repeater has a built in controller ). His solution was to shut off the repeat function, using software. Problem solved. Sorry, I can't help more, and I don't know what commands he used. Now I have a separate transmitter and receiver, at least as far as the controller is concerned.
On Dec 6, 2007 4:12 PM, ve7ltd <[EMAIL PROTECTED]> wrote: > > > > > I am trying to help an IRLP owner interface his GR-1225 repeater to > an IRLP system. Mind you I am 1000 miles away, and can only help over > the phone. > > The problem occurs when he tries to operate full duplex. The repeater > works fine on its own, and works fine when the node is operating in > half duplex. > > But as soon as the External PTT is asserted on Pin 3 of the accessory > jack, the RX Audio from Pin 11 is being muted. I have been looking > through the help file for the WinRSS that runs the 1225 series, but > for the life of me I can not figure out why a full duplex repeater > would do this. > > The audio from pin 11 needs to be squelch muted, but why is it also > being muted when the external PTT is applied? > > Can anyone come up with a solution? How would you ever be able to > configure this repeater to use an external controller? > > Dave Cameron - VE7LTD > IRLP System Designer > > ------------------------------------------- Ken
