There is an another option. PacComm had a 4 channel A-D converter board
for their Tiny-2 TNCs. It operated with the TheNet X1JR4 node software.
Each of the channels had adjustable scaling to yield whatever numbers
you wanted on the output. It has been a while since I have been
involved with packet but as I recall it would send out the info as part
of a bulletin packet or possibly on request. You would need a packet
terminal to display the result.
I am not sure if the AD-4 is still available (it is mentioned on their
website but not shown as a current product) but the actual circuit was
quite simple and a diagram was available as I recall with the X1JR4 info.
Burt VE2BMQ
Mike Besemer (WM4B) wrote:
> I’m interested in remotely monitoring the power/SWR at the repeater site
> and having the ability to have a macro poll the device and report status
> over the repeater output. I see that LDG makes a power meter with a
> voice output that I could probably interface, but is there something
> designed more specifically for the application I have in mind? The
> controller is a CAT-1000.
>
> Ideas?
>
> Mike
>
> WM4B
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
