Hi, Sorry for the delay in replying, been sleeping as on night shift. In responce to your question I am trying to get a signal out to my controller from the Mitreks and the Taits so I can allow users to get a signal report for their connection into the repeater. It is not for setting up the radio, I have that information from the manual.
Thanks to everyone for your input so far. Kevin. Get Skype and call me for free. ----- Original Message ----- From: George Henry To: [email protected] Sent: Tuesday, January 15, 2008 7:47 AM Subject: Re: [Repeater-Builder] Signal Circuit Wanted - If Possible. To be sure we all understand what you are trying to accomplish: are you looking for a suitable connection point for an S-meter type reading? In the Mitrek, this can be found at the metering socket, pin 1. Can't help with the Tait.... George, KA3HSW / WQGJ413 -----Original Message----- >From: Gmail - Home <[EMAIL PROTECTED]> >Sent: Jan 14, 2008 12:16 PM >To: [email protected] >Subject: [Repeater-Builder] Signal Circuit Wanted - If Possible. > >Hi All, > >I have a radio that does not have any point for taping a line for a signal report from it to the controller. >Radios in question, Mitrek and Tait. Controller is RLC-3 and RLC-2A >So I am after a circuit if possible that will allow me to get a signal report from the incoming contact. >I have done a search, but most of it is not related to radio (believe it or not) > >Any help would be great. > >Kevin. >
sparc_nz
Description: Binary data
