Thanks Mike, Once again repeater builders come through. Collin
-----Original Message----- From: Mike Morris WA6ILQ <[EMAIL PROTECTED]> To: [email protected] Sent: Tue, 4 Mar 2008 4:05 am Subject: Re: [Repeater-Builder] Mitrek tune up This might help... <http://www.repeater-builder.com/motorola/test-sets/test-set-index.html> Mike WA6ILQ At 12:30 AM 03/04/08, you wrote: >Well, I've never tried tuning one with a manual, but >the official Motorola diddle stick seems to work just >fine. Sorry; couldn't let that one pass. > >Seriously though, any analog VOM with a 50 microamp >movement will work just fine. In this regard, the >Motorola Test Set is just a 50 uA meter and a rotary >switch. No magic here. > >Eric, KH6CQ > >--- [EMAIL PROTECTED] wrote: > > > Dear Friends, > > Has anyone tuned a Mitrek receiver using the manual? > > I was wondering if > > this can be done using a standard uA meter? I have > > come to the > > measurements at point 6 and cannot get a reading. > > Maybe doing something > > wrong. I have overall netted a great increase in > > sensitivity from what > > I had before. This is a high split receiver so I am > > tuning right down > > to the bottom on the presets. Any help? Do I need to > > get the Motorola > > test set? Is it just a meter and some switches? > > Thanks, Collin > > > > > > >__________________________________________________________ >Be a better friend, newshound, and >know-it-all with Yahoo! Mobile. Try it >now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > >Yahoo! Groups Links > > >
