Hi guys.. This is a good thread.. I've been wondering about the decibel UHF harness for a long time. SO.. If I'm reading Chuck right, the DB UHF elements are 100 ohms.. Correct me if I'm wrong, but doesn't this mean I could pull 2 of the elements off a DB408 and make a DB404 by simply connecting the elements by equal lengths of some good 50 ohm coax to a T, and attach a 50 ohm feedline to the T??
Can this be? Tell me if this will work guys.. Russ Crisp K4RCC ________________________________ From: Repeater-Builder@yahoogroups.com [EMAIL PROTECTED] On Behalf Of Chuck Kelsey [EMAIL PROTECTED] Sent: Thursday, March 06, 2008 10:13 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Decibel and Telewave - Sinclair type Folded Dipole Antenn The Decibel UHF elements are NOT 50-ohms, they are 100, but we were talking about the low band dipoles. They are 50-ohms. Chuck WB2EDV ----- Original Message ----- From: "Ron Wright" <[EMAIL PROTECTED]<mailto:mccrpt%40verizon.net>> To: <Repeater-Builder@yahoogroups.com<mailto:Repeater-Builder%40yahoogroups.com>> Sent: Thursday, March 06, 2008 10:07 PM Subject: Re: [Repeater-Builder] Decibel and Telewave - Sinclair type Folded Dipole Antenn > s., > > This is true about the folded dipoles on some of these antennas. I've > seen some remove them from the mast that came with them, re-mount on the > leg of a tower and the SWR went wild. More so on UHF versions. > > 73, ron, n9ee/r > >