I hate to be a nag, but it would also be helpful if you provided some combination and/or module part numbers. I am not being sarcastic, just realistic. If you can identify exactly by part or model number what you have, it makes it much easier for the Elmers on this list to zero in on the problem and make constructive suggestions.
There are several different Mastr II VHF transmitters, which one do you have? Which LBI are you using to troubleshoot? 73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of kd5inn Sent: Thursday, March 13, 2008 6:14 AM To: [email protected] Subject: [Repeater-Builder] Re: Master II 110w repeater I'm sorry, I forgot to put in that this is a vhf repeater. --- In [email protected] <mailto:Repeater-Builder%40yahoogroups.com> , "kd5inn" <[EMAIL PROTECTED]> wrote: > > I recently aquired a Mastr II repeater. It turns out that it was only > putting out 3.5 watts. After a look around here, I was able to get the > pa back in shape by correcting a broken solder near the hamonic > filter. Now, however, it shows to be putting out 140 to 150 watts, and > even when I try to turn down the power on the 10w driver on the pa > board, nothing happens. I need to turn the power down, but it doesn't > seem to respond. Any ideas?? > > kd5inn
