At 04:15 PM 04/22/08, you wrote: >At 04:08 PM 4/22/2008, Eric M. wrote: > > >Does anyone have any tips for using an Arcom 810 on an MSR2000 VHF > >repeater? One of the local clubs up here has acquired these 2 pieces of > >equipment and are looking to get this repeater up and running to replace > >their existing machine. ><----Have a look at the Repeater Builder website, Eric. It has all >the info you'll need to interface any controller to the MSR > >http://www.repeater-builder.com/mitrek/mitrek-interfacing.html > >Ken >------------------------------------------------------------------------------ >President and CTO - Arcom Communications >Makers of repeater controllers and accessories. >http://www.arcomcontrollers.com/ >Authorized Dealers for Kenwood and Telewave and >we offer complete repeater packages! >AH6LE/R - IRLP Node 3000 >http://www.irlp.net >"We don't just make 'em. We use 'em!"
While the MSR RF side is Mitrek based, the control shelf is closer to a Micor than a Mitrek. Look at <http://www.repeater-builder.com/mitrek/mitrek-index.html> and scroll down to the section titled "MSR-2000 Station" Using the model table you need to figure out what you have. There are three different interfacing articles linked to that page, and notes on a fourth. Mike WA6ILQ
