Here is a link to the error codes. http://www.repeater-builder.com/motorola/spectra/spectra-error-codes.html
FAIL 01/90 is a general failure code. Not sure what may have caused that. However, there is a LOT of information to be had at www.Repeater-Builder.com . Good luck! Mark - N9WYS From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Mike mike Sent: Wednesday, April 23, 2008 6:42 PM To: [email protected] Subject: RE: [Repeater-Builder] spectra radio dead from ebay thanks mark it displays 01/90 code any motorola experts out there? i need board level help if it has bad custom ics then its a waste of time if the rest of the caps are baad then i will replace _____ To: [email protected] From: [EMAIL PROTECTED] Date: Tue, 22 Apr 2008 08:16:03 -0500 Subject: RE: [Repeater-Builder] spectra radio dead from ebay YES... Radio will not power up without it (ignition sense wire). Mark - N9WYS -----Original Message----- From: [email protected] On Behalf Of mikewm9v spectra radio dead from ebay want to fix this radio no display need schematics need to know if radio will power up without control head has front panel pcb has power in entire unit do i need ignition sense hooked up recapped display board and will recap other boards will sit down with other boards and scope out radio used but not too abused have mic also have extra wavetek 2000b monitor 15 years as bench tech for radio shack i did all the scanners and amateur radio equipment for them wm9v _____ Spell a grand slam in this game where word skill meets World Series. Get in the game. <http://club.live.com/word_slugger.aspx?icid=word_slugger_wlhm_admod_april08 >
<<image001.jpg>>
