Isn't it terrible when you get a project halfway done and then have to walk away from it for months...then come back to it and try to start where you left off ;-)
Not sure what I was thinking...but I had already ran a wire from the wiper on the deviation pot...to Pin 5 on the radio. I had gone in and cut the up / dwn pin traces on the board. That was I could use those pins for different things like COS or TX Audio to the deviation pot. In doing this I was able to to bring everything out through the mic plug. I think part of the loading and or audio issues was my wiring for that "TX Audio" was actually connected to the tone board wiring. Not sure what was going on, but lifted that wire off...connected to the RIGHT tx audio wire...and out comes great audio. Thanks for everyones help. 73, Robert KD4YDC
