Thanks skipp. Yes it has all the filtering for a repeater. I don't have an R2 audio/squelch module but I'll use a second R1 module which I will modify with the addition of a small PL decode board and make sure it will reflect the same pin-out as the R2 board lay-out etc.
Tony VE3DWI _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of skipp025 Sent: April 30, 2008 19:48 To: [email protected] Subject: [Repeater-Builder] Re: MSR2000 Shouldn't change the performance regardless of which Receiver-IF you use if the duplex filter boards, covers and proper shield kits are installed. Sometimes some of the receiver stuff leaks RF but it shouldn't be that much, nor that far to change anything in the other receiver as long as the mentioned above options are in place. Motorola sold option kits to operate both receiver boards at the same time. cheers, skipp > "Tony Lelieveld" <[EMAIL PROTECTED]> wrote: > > Hi all, > > Does anyone know what the consequences are of using a second receiver with > an IF of 10.7 instead of 10.8 MHz in the 2nd RX spot of an MSR2000. > > Tnx for any help > > VE3DWI >
