At 5/9/2008 13:40, you wrote: > if you are using the same wires from the cans to the tees, about all I >can suggest is maybe retuning the duplexers while connected to the antenna.
If there is 0 dB of desense looking into a dummy load & 30 dB into an antenna, duplexer retuning is not the answer. The problem is definitely beyond the duplexer (feedline, antenna, something acting as a mixer in the near field, etc.) > Also check and recheck each section of cable between the cans, etc... > Not saying this will be the answer, but at this point you seem to have >little to lose by trying it. ..except having to retune the duplexer after you detune it looking for the real problem. BTDT. Bob NO6B
