http://edocket.access.gpo.gov/cfr_2007/octqtr/47cfr95.631.htm


Sec. 95.631  Emission types.

    (a) A GMRS transmitter must transmit only emission types A1D, F1D, 
G1D, H1D, J1D, R1D, A3E, F3E, G3E, H3E, J3E or R3E. A non-voice emission 
is limited to selective calling or tone-operated squelch tones to 
establish or continue voice communications. See Sec. 95.181 (g) and 
(h).

    (d) An FRS unit may transmit only emission type F3E or F2D. A non-
voice emission is limited to selective calling or tone-operated squelch 
tones to establish or continue voice communications, digital data 
transmission of location information or text messaging.

    (e) No GMRS or CB transmitter shall employ a digital modulation or 
emission.

    (f) No GMRS, CB or R/C transmitter shall transmit non-voice data.

    (j) A MURS transmitter must transmit only emission types A1D, A2B, 
A2D, A3E, F2B, F1D, F2D, F3E, G3E. Emission types A3E, F3E and G3E 
include selective calling or tone-operated squelch tones to establish or 
continue voice communications. MURS transmitters are prohibited from 
transmitting in the continuous carrier mode.

----- Original Message ----
From: wd8chl <[EMAIL PROTECTED]>
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 2, 2008 8:27:54 AM
Subject: Re: [Repeater-Builder] GMRS and P25 Question

Steve wrote:
> I have a question if someone might be able to awnser it grate .
> 
> I am getting ready to Setup a GMRS Repeater . However the Repeater that 
> I would be using is a P25 Digital / Analog Repeater . I was wondering 
> if P25 Astro Digital Can be Used on the GMRS Band ? I have called the 
> FCC About my Question and with no Awnser to my Question . Anyone on the 
> Group have any Ideas ?  There is nothing in the Rules for GMRS About 
> P25 Digital Voice . Let me know , Thanks .
> 
> 
> Steve .

It's a question of emission type. I'm not in a position to look up what 
the emission type is, nor what types are authorized for Part 95, but 
that's what you want to look for.

The FCC will not mention "P25" in the rules.

Reply via email to