Sorry forgot to give J8 or P8 pin number ( Pin 15 ). w4cso
----- Original Message ----- From: Camilo So To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 06, 2008 3:43 PM Subject: Re: [Repeater-Builder] Maxtrac Mic-Hook software option? There is two way to do it, one solder a wire on P8 or J8 or use a mic plug and solder a wire between pin 3 and 4, with the mic plug in its on PL or DPL, if you use the P8 or J8 by soldering a wire and build a DTMF board as a remote control with 3 digit code to turn on and off the PL. 73 W4CSO ----- Original Message ----- From: skipp025 To: Repeater-Builder@yahoogroups.com Sent: Sunday, July 06, 2008 11:19 AM Subject: [Repeater-Builder] Maxtrac Mic-Hook software option? Hello to you Maxtrac people... Please help me answer an off group email information request. Re: Maxtrac Mobile used as a repeater receiver. Is there a way in programming software to force a mic off-hook CTCSS Decode without having to actually have the mic or a "mute plug" in the radio front mic jack? Easy enough to make the modular mic on-hook plugs but some radios will allow you to toggle the CTCSS function in software. Thanks in advance for your replies. cheers, skipp