Ron: I have had great luck using U-Bolt-It,Inc. Http://www.uboltit.com/index.html out of Houston, Texas. They have a extensive inventory of large size hot dipped galvanized U-Bolts, I have also had them make me Slant U-Bolts and Hook Bolts to mount antennas, on angle iron cross braces. You did not mention how high up the tower you were going to mount your station master antenna, but no matter its height. You do not want to go up there very often, and using bent all-thread is a train wreck waiting to happen, due to the stress set up in the root of the thread on the stretch side when you bend the all-thread. All-thread has many good uses, but none of them are on a tower.
Gregory AC6VJ --- In [email protected], Ron Wright <[EMAIL PROTECTED]> wrote: > > Hi all, > > I am about to put up a Telewave Super Station Master up over 1000 ft above ground on a large tower. > > The legs at that level are 5.25" and am in need of hardware for securing the top and bottom mounts to the legs. I have all except the leg mounting hardware. > > I've looked at Tessco and know they can be expensive, but will pay for it for this install if I have to. Does anyone know of a source or V-clamps or the like for 5.25" legs??? > > This has to be hardware that will last 20 years and not hose clamps which I have. > > 73, ron, n9ee/r > > > > Ron Wright, N9EE > 727-376-6575 > MICRO COMPUTER CONCEPTS > Owner 146.64 repeater Tampa Bay, FL > No tone, all are welcome. >
