I set all my repeaters for 450 Hz to 550 hz and have never had a problem with listeners being able to decode.
so something in the range that David suggests below should be fine. I know some people who think PL level should be set at 750 hz to 900 hz. In my opinion, that is way to high, and it is annoying to hear the PL tone which can be done at those levels. ------ Original Message ------ Received: Sun, 20 Jul 2008 06:45:05 AM PDT From: "David Murman" <[EMAIL PROTECTED]> To: <[email protected]> Subject: RE: [Repeater-Builder] Re: PL Problem > Run all my repeaters with a tone of 600 hz. This is what GE recommended when > I was in the 2-way business. So far all three repeaters, two VHF and one > UHF have had no problem with any radio being able to decode the tone. > > > > > > > > David > > > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of nj902 > Sent: Saturday, July 19, 2008 9:37 PM > To: [email protected] > Subject: [Repeater-Builder] Re: PL Problem > > > > Actually, what I think what I confirmed is that I passed reading > comprehension... > > > The "Standard" is 500 to 1000 Hz . Period. > > ................................................................. > > --- In Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> > yahoogroups.com, "Eric Lemmon" <[EMAIL PROTECTED]> > wrote: > > " My statement about the definition of "Standard CTCSS Modulation" is > correct, and thank you for confirming that. ..." > > > >
