Actually, no. My stuff is HSPD7 county-wide Public Safety critical and the Raduis belongs to an adjacent state fish and game ops. We're trying to be nice guys and do some testing before we rip out the Radius and roll it down the long, steep driveway. :-)
Bp --- In [email protected], "George Henry" <[EMAIL PROTECTED]> wrote: > > I trust you plan to do this with the Radius owner's blessing, and with him > present? > > If not, DON'T touch his radio or feedline - you're setting yourself up for a > world of legal trouble if he has problems down the line! > > 73, > > George, KA3HSW / WQGJ413 > > > ----- Original Message ----- > From: "Bill Powell" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Saturday, July 26, 2008 9:29 PM > Subject: [Repeater-Builder] Cable length for NOTCH cavity? > > > [snip] > > So... I tuned a spare can as a notch (~19db) at freq X and intend to > place it in-line with the Radius in hopes of removing (lowering) the > level of freq X getting into the Radius transmitter. A 20 dB > reduction "should" reduce the intermod by 40 dB IF the mixing is > happening in the Radius. > I hope..... > > I intend to remove the antenna cable from the Radius, plug it into the > T at the can and run a double-shielded cable from the can to the Radius. >
