Bob,

Both power supplies have the same capacity and physical attributes.
However, when I compared their respective schematics in the Power Supply
Service Manual 6881094E30, I saw that the TPN1185 (Battery Charger) power
supply has several connections to the station RF tray that are not used in
the TPN1186 supply.  J603-5, -6, -8, and -9 have no connection on the
TPN1186 supply, but are wired to the RF Tray on the TPN1185 supply.  These
are AC Fail and overvoltage signals.  It would be prudent to ensure that the
appropriate interfaces on the CXB station side are wired or programmed to
use these signals.

The Power Supply Service Manual 6881094E30 is still available from Motorola
Parts for about $20.

73, Eric Lemmon WB6FLY
 

-----Original Message-----
From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Luttrull
Sent: Sunday, August 17, 2008 1:19 PM
To: [email protected]
Subject: Re: [Repeater-Builder] MSF 5000 CLB and CXB

THe one for the CLB is TPN1185A and the one in the CXB is TPN1186B. on the
CLB it has a light for BATTRVRT and on the CXB it dose not.
Bob

        ----- Original Message ----- 
        From: Eric Lemmon <mailto:[EMAIL PROTECTED]>  
        To: [email protected]
<mailto:[email protected]>  
        Sent: Sunday, August 17, 2008 1:08 PM
        Subject: RE: [Repeater-Builder] MSF 5000 CLB and CXB


        Bob,
        
        I'd say the chances are very good that you can switch power
supplies.
        Nevertheless, please advise the model numbers of the power supplies
you
        have.
        
        73, Eric Lemmon WB6FLY
        
        
        -----Original Message-----
        From: [email protected]
<mailto:[email protected]> 
        [mailto:[email protected]
<mailto:[email protected]> ] On Behalf Of Bob Luttrull
        Sent: Sunday, August 17, 2008 1:05 PM
        To: [email protected]
<mailto:Repeater-Builder%40yahoogroups.com> 
        Subject: [Repeater-Builder] MSF 5000 CLB and CXB
        
        HI All
        I have 2 repeaters one is a MSF 5000 CLB and the other is a CXB. I 
        would like to know if there is a way to use the power supply from
the 
        CLB with battery backup in the CXB. I want to use the battery backup

        on the CXB. I have an new CLB power supply in the box with battery 
        backup. Can it be done?
        ThankS
        Bob
        kd7ikz
        
        

 

Reply via email to