Hi Joe, I am not aware that there is 2 separate software that is use on Desktrac, What is the version of the software that program the front panel? So that I can order it from Motorola, to my knowledge the only software that is needed to program the Desktrac is RVN4080 version R03,04,00. When you try to read the unit a screen pop up to tell you turn the switch to position 3, then 2, and 1. same as programming the unit, all I need is the default archive to clone the unit. Any one on this group Please correct me if I am wrong.
73 W4CSO ----- Original Message ----- From: Joe Burkleo To: [email protected] Sent: Tuesday, August 19, 2008 3:06 AM Subject: [Repeater-Builder] Re: Desktrac UHF 40 Watts Repeater Default Archive You do realize that there are 2 seperate pieces of software that is required to program the Desktrac repeaters. One is for the front panel and the other is for the radios. There us a small switch on the front panel that chooses which programming mode you are in. Just to be clear as to what you are looking for here, if I am understanding this correctly, you are needing a default configuration file for the front panel setup for repeater mode. Joe - WA7JAW --- In [email protected], "Camilo So" <[EMAIL PROTECTED]> wrote: > > Hi I hope some one on this group can help me on a Desktrac repeater default archive, What I mean is I am trying to put a Desktrac repeater together, from my junk, > but I need to program the front panel of the Desktrac repeater (not a base unit), if only I have the model number to clone it to my Desktrac, I know how Motorola restricts there software, but this is not the software I am asking for, its the default (ARC) or archive. Thanks. > > > > 73 > W4CSO >
