Ian,

The service manual for the D34TSA series mobile radios is 6881037E90, but it
has been cancelled and is NLA from Motorola Parts.  You may be able to find
that manual by searching the many vintage manual vendors.

You might be able to get the information you need by perusing the D33TSA
(VHF High Band) manual 6881037E95, which is still available from Motorola
Parts for about $28.  The PA board itself is different, of course, but the
wiring to it should be similar if not identical between the VHF and UHF
models.

73, Eric Lemmon WB6FLY
 

-----Original Message-----
From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Ian Miller
Sent: Sunday, August 24, 2008 1:15 PM
To: [email protected]
Subject: [Repeater-Builder] maxar 80 uhf

Fellows

I have a MAxar 80 mobile MD34tsa1800A sitting on the shelf here.

Its a 25 watter according to the side plate.

I'd like to make use of the PA section on our Hamtronics unit to 
experiment, to see if extra RF out will cause any desense. It looks 
pretty beefy on the heatsink for a trial run.

Here is my problem. Aside from the small RF in and out cables, there 
are 5 leads that go to the main board. I will assume they are for B+ 
and some sort of TX switching. I dont need any TX switching as the 
amp will be in the TX line of the repeater.

Has anyone got a wiring diagram for the MAXAR handy?

I've looked on some manuals sites with no luck.

Thanks

Ian
VA2IR



 

Reply via email to