You certainly can use a duplexer at the input and output spread you listed and it should work quite well.
tom ----- Original Message ----- From: Peter Dakota Summerhawk To: [email protected] Sent: 8/25/2008 11:45:59 AM Subject: [Repeater-Builder] Need some help- M-10 related OK, got the M-10s in the mail yesterday and will have to get them over to the shop to program them. What I got for a freq spread is: 151.835 and 153.020 so I can t use a duplexer and will have to run a dual antenna system. How far apart do I have to mount these to make sure they work ok? I have a Motorola RICK to use and want to have the units programmed for around 15 watts or so that way I dont burn out the radios when we really need it. I am thinking that the 153.020 is going to be repeater input and the 151.835 is the output. I will be running DCS on the system to avoid problems with the system. The radios (CP200) are going to be programmed with MDC1200 signaling as the supervisors carry a HT1250 so they can see who keys up and if there are any problems. I need some help on getting the antennas set up and I can program the rigs for the repeater use so no problem there. Thanks Peter Summerhawk-N0WRE No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.6.7/1632 - Release Date: 8/25/2008 7:05 AM
