Here is a question a posted yesterday... Any information would be great, thanks! Paul
Paul, If you are a member of the Repeater-builder Yahoo group, pose this question to Skipp... IIRC, he is a Kenwood dealer and has come up with an add- on circuit of some type to obtain the "correct" voltages. But FWIW, I am running an external controller with my TKR-820 with no problems - and no mods to the COR voltage(s). You are correct - Pin 13 is COR (active LO)... Mark - N9WYS -----Original Message----- 1b. Re: TKR-820 Posted by: "wd8chl" [EMAIL PROTECTED] com jdbtcore Date: Thu Aug 28, 2008 1:06 pm ((PDT)) Paul wrote: > When mating a TKR series repeater to a shared repeater tone panel, the > kenwood only shows 3.5 volts on the COR line. Does anyone know if that > is sufficient for a CSI TP-154? Is there a fix/mod or better place to > get 5 volts, I am getting it from the 15 pin molex pin#13. > Thanks, > Paul
