I'm not so sure you have it right yet..
Now you have audio that is not processed, which will bring another wave of 100 helpers. Don't rush it to the hill. Burn it in - listen to the audio. You may need some de-emphasis now. Then the old .2 cap and 15K argument will start. You are not "golden" yet. One of my suggestions which I always give: Don't rush it to the hill. We always find time to fix it, but we never have time to do it right the first time. Sit on it for a while. Make it work. Try to break it. I have 17 radios, and have one failure every two years. Key it down - burn it in. Bill - W6CBS _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Mike DeWaele Sent: Tuesday, October 21, 2008 7:22 PM To: [email protected] Subject: RE: [Repeater-Builder] Re: Ge mastr 2 link question Thanks to all that replied with suggestions for my linking problem. With all the answers you gave I was able to resolve the problem. The first mistake was in one radio I forgot to put a load across the speaker connections as I wasn't using one. ( the other radio I did. must have been one of those late night deals). Once I did that the hum went away but the audio was very disorted from the link to main port. Took the audio off speaker hi and connected it to vol arm. Problem solved and now sounds as it should. Now if it ever stops raining it will be back to the hill to reinstall at the site. Once again it's amazing the wealth of information you can get from the repeater builder group! Thanks agian, Mike KA2NDW
