I'd suggest that you go to the Repeater-Builders website and do some reading. Hopefully you haven't destroyed the front end of your receiver.
Chuck WB2EDV ----- Original Message ----- From: "electrician2000" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, October 26, 2008 2:38 PM Subject: [Repeater-Builder] Telewave BrBp Problems > Hello all, I recently came into the chance to acquire a 2Meter > repeater coordination and jumped at the chance. I have used some new > and old equipment for the job. Where my problem starts is with the > duplexes. When field tuned I have no receive signal when the > transmitter kicks in. We tested the cans, upon doing so I notice a > problem on the receive side. Tuning them I would put 10watts in and > get 10watts out on the receive frequency. Then I switch the radio > over to the transmit frequency and I have 10 out of 10 going through > when tuned for the receive frequency. I am at a total lost as to what > I need to do to solve this problem. It seems that the cans are not > cutting out the frequency as they are designed. More info on the > cans: Telewave 2 Meter, 4 Cavity, TPRD 1554. > Thanks > KC9JOY >
