--- In [email protected], "Eric Lemmon" <[EMAIL PROTECTED]> wrote: > > Darrell, > > The 19D413943G3 is a "Remote Keying Panel Interface, Option 7442" for > converting a second receiver in a Mastr Pro 72 station to a voting receiver. > The station must first be modified for a 4-wire tone remote control. This > unit has nothing to do with telephone interconnect operation in its original > application. The manual that covers this unit is LBI-4909. Product Code 72 > has some information: > <www.repeater-builder.com/ge/product-code-indexes/index-pc72-professional-72 > -stations.pdf> > or here: > <http://tinyurl.com/5cthvd> > > 73, Eric Lemmon WB6FLY > > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of jistabout > Sent: Sunday, November 16, 2008 12:19 AM > To: [email protected] > Subject: [Repeater-Builder] GE phone patch info needed..... > > Hi all, I have here what I think is a simple telephone interconnect > made by GE. The # on the front is PL19D413943G3. This came out of a GE > MASTR PRO station, and I wish to use it with a different system. > > I'm pretty sure that I've correctly figured out the wiring, but I'd > like to see if it even really is a phone patch or not. If it helps, > its housed inside a 1-3/4" high rackmount case, with just a single > circuit board. > > Any help is very much appreciated, and thank you in advance..... > > - Darrell/KA7BTV >
Thanks Eric, thats exactly what I needed to know. I thought it was an interconnect because it has wht looks like an 88mh toroid coil on it. Thanks again :).
