I did not take any pictures Gervais, but the important thing to keep in mind is 
that the complete interface to the external radio can be done using the 
terminal connections on the rear of the card file.  The modifications are only 
documented for a PSE-508, but the idea is there to use the two unused terminals 
on the card file for the receive audio and RUS signals by connecting them to 
the right pins in the repeater.  Along with the existing mic terminals the 
interface board can then be remoted or placed in the link radio for a simple 
interconnect.

73 - Jim  W5ZIT

--- On Fri, 11/21/08, gervais fillion <[EMAIL PROTECTED]> wrote:
From: gervais fillion <[EMAIL PROTECTED]>
Subject: RE: [Repeater-Builder] Master 2 vhf and a link radio  Uhf,How???
To: repeater-builder@yahoogroups.com
Date: Friday, November 21, 2008, 6:53 PM










    
            


JIm

these are great files for me and my project,

by chance would you have some pictures of this board by chances??

Again you help is mostly appreciated by me 

thanks

Gervais ve2ckn

 



 





To: Repeater-Builder@ yahoogroups. com
CC: [EMAIL PROTECTED] com
From: [EMAIL PROTECTED] com
Date: Fri, 21 Nov 2008 16:41:36 -0800
Subject: Re: [Repeater-Builder] Master 2 vhf and a link radio Uhf,How???








Gervais, Here are the files I could not find to send you before.

73 - Jim  W5ZIT

--- On Fri, 11/21/08, gervais fillion <[EMAIL PROTECTED] com> wrote:

From: gervais fillion <[EMAIL PROTECTED] com>
Subject: [Repeater-Builder] Master 2 vhf and a link radio Uhf,How???
To: repeater-builder@ yahoogroups. com
Date: Friday, November 21, 2008, 11:16 AM




Hi 
i have my repeater that is master 2 base repeater,,the oven as called.
i wonder what is the simplest way to connect an uhf radio,Ge phoenix on her??
i could use the screew on her back plate??
i need an uhf that would be use as a link radio,anyone that want to use the Vhf 
repeater could "enter" via the uhf link radio.
can it be done in a simplest way.
i dont need cw id since i already have one on the vhf side so it would tx on 
uhf too.
 
can you help me ??
 
thanks all 
gervais ve2ckn
le bic,quebec


,___ 


 

      

    
    
        
         
        
        








        


        
        


      

Reply via email to