I understand and agree with all that, but is there a 20-pin connector available, and if so, what's the part number? Someone might want to make their own cable for a CDM some day and make it idiot-proof.
Bob M. ====== --- On Mon, 12/1/08, Brian Poellnitz <[EMAIL PROTECTED]> wrote: > From: Brian Poellnitz <[EMAIL PROTECTED]> > Subject: Re: [Repeater-Builder] Motorola CDM1250 COS > To: [email protected] > Date: Monday, December 1, 2008, 9:37 AM > The 16-pin connectors work just fine on CDM mobiles. They > install on > the "middle" 16 pins, leaving one pair of > unonnected pins on each side. > I worked for a Moto shop a few years back and we used them > frequently. > If I remember right, even the Moto documentation states > this. He should > be fine for most applications, unless he needs a function > that can only > be found on one of the outside 4 pins. These radios could > be used with > a RICK, so I think the 16-pin plug would have everything. > > 73s de N4BWP > > Bob M. wrote: > > > > Eric: is the HLN9242A accessory kit you mention for > 16-pin or 20-pin > > jacks? There are several eBay sellers of 16-pin > connectors and > > pre-terminated wires for use on many Motorola radios, > but I haven't > > seen any 20-pin plugs. > > > > Bob M.
