Must have been a serious short circuit on the 9.6V line to burn the inner foil. I'm very surprised. Are you just missing 9.6V on various ICs, or has that foil actually shorted to other layers? Did it take anything else with it (like the 9.6V line in the flat cable that plugs into the SSCB)?
Theoretically any VHF/UHF/800 MHz SSCB should work in that unit. There's no physical difference between a CXB and an RLB in the area you've got problems with. Bob M. ====== --- On Thu, 12/4/08, k6kusman <[EMAIL PROTECTED]> wrote: > From: k6kusman <[EMAIL PROTECTED]> > Subject: [Repeater-Builder] SSCB > To: [email protected] > Date: Thursday, December 4, 2008, 7:37 PM > Happy Holidays to everyone. I want to have one but my poor > C63RLB7106BT's SSCB is totally gonzo. We have checked > everything over > very carefully and have found the distrubtion section of > the 9.6v part > of the sscb is burnt in like layer 2 and 3 of the > board..so.. it would > seem that the board is totally gone. What I need to find is > the fairly > newer TLN3385 SSCB. I know that U people should be the best > source for > finding one of these. The SSCB that was in it was the 3198 > but the > newer service manual does say to replace that with the 3385 > so PLEASE > searce your stockpiles of goodies and see if ya can find > one for me. > It's a lonely MSF 5000 limited without it's SSCB. > Thanks again.
