Thanks to all that offered suggestions on replacement relays. Rick at amtronix was invaluable. The biggest thing he told me was that there are 2 relays in the add-on cellular adaptor that most people don't use. I took it apart and sure enough, there were the relays I needed.
Something to keep in mind. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 ----- Original Message ----- From: "Chuck Kelsey" <[email protected]> To: <[email protected]> Sent: Friday, December 19, 2008 4:46 PM Subject: Re: [Repeater-Builder] Teledyne relays > Try Rick Bowman > http://www.amtronix.com/ > > Chuck > WB2EDV > > > ----- Original Message ----- > From: "Scott Zimmerman" <[email protected]> > To: <[email protected]> > Sent: Friday, December 19, 2008 4:41 PM > Subject: [Repeater-Builder] Teledyne relays > > >> I'm looking for a few Teledyne 432YZ-7486 relays as replacements for some >> that have burnt up in my HP-8920. Anyone have any leads? I was a good boy >> and did my research homework with a search engine, but I haven't been >> able >> to find any. I tried calling Teledyne, but apparently they split early on >> Friday. (Got nothing but voice mail) >> >> A blown up '8920 input module would work too. I'm not above transplanting >> parts from a donor board. >> >> BTW: When it says 200mW max on the antenna and duplex ports - IT MEANS >> IT!!! >> >> Scott >> >> Scott Zimmerman >> Amateur Radio Call N3XCC >> 474 Barnett Rd >> Boswell, PA 15531 >> >> >> ------------------------------------ >> >> >> >> Yahoo! Groups Links >> >> >> > > > ------------------------------------ > > > > Yahoo! Groups Links > > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.9.19/1857 - Release Date: 12/19/2008 10:09 AM
