It should be a simple matter of trimming the elements to optimize it for 440. If it is in spec as Eric says, even better. Have you checked the SWR on it?
Joe M. Mike Mullarkey wrote: > HI Joe, > > > > I know it would have a lot of up tilt and that is why I am wanting to > modify it so I can run it at the 445Mhz freq area. I am sure someone out > here has modified one and documented it. > > > > Mike > > > > > > ------------------------------------------------------------------------ > > *From:* [email protected] > [mailto:[email protected]] *On Behalf Of *MCH > *Sent:* Saturday, December 27, 2008 1:38 PM > *To:* [email protected] > *Subject:* Re: [Repeater-Builder] Celwave Super Station Master UHF > > > > As it sits, it would have quite a bit of UPtilt on the 400 frequencies. > That's not good unless your repeater is in a valley. > > Joe M. > > Mike Mullarkey wrote: >> Has anybody took the 1152-2 station master up in freq from 412-420Mhz to >> the 440Mhz ham band. I have new never used in the tube and want to bring >> up the antenna to operate in the 445Mhz area. >> >> >> >> Mike K7PFJ >> >> >> >> >> >> >> >> >> >> > >
