Mark is correct. Micor receiver, do the below 445 MHz mods listed on the repeater- builder website, use the factory PL decoder, and a Angle Linear preamp. This combination is what we use on our link system here on the Oregon Coast.
Receiver will typically open squelch at .1 uv or a little less and 20 db quieting wiil be .2 uv or better. Spectra-Tac housing is very well shielded and a excellant choice. If you are not using a Micor Unified chassis for the repeater, then the Spectra-tac housing is the only way to go, as it is far better shielded than the unified factory repeater chassis. Joe - WA7JAW --- In Repeater-Builder@yahoogroups.com, "Mark" <n9...@...> wrote: > > If it must be Motorola, then it must be MICOR unit of any type. Bulletproof > is the only way to describe them. > I use SpectraTAC units with MICOR receivers in them and absolutely LOVE > them. They are on 449.550 PL 114.8. > > Mark - N9WYS > > -----Original Message----- > From: Repeater-Builder@yahoogroups.com On Behalf Of n8rtn > > ok guys looking to update my uhf repeater Receiver. > i want to hear a nat fart 10miles away.. > what should i get ??????? > must be a motorola !! > > Thanks.......N8RTN 442.875+ 100.0 pl >