I guess I could, but you'd also see the effect of the crossband coupler, jumpers, and everything else in-line. I figured I'd start afresh with all new antennas tested at ground level.
> -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Chuck Kelsey > Sent: Sunday, March 22, 2009 7:18 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Decibel dipole array sweeps > > Why not just include it with your article already posted? > Just add the notes > along with it. > > Chuck > WB2EDV > > ----- Original Message ----- > From: "Jeff DePolo" <[email protected] <mailto:jd0%40broadsci.com> > > To: <[email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Sent: Sunday, March 22, 2009 7:11 PM > Subject: RE: [Repeater-Builder] Decibel dipole array sweeps > > > > > I have a Sinclair 8-bay with half-wave element to mast > spacing stored in > > the > > Sitemaster, but it was swept from the far end of 600' of > 1-5/8" with a > > topside TX-RX crossband coupler. It's spec'ed for 406-512 > MHz. I can't > > keep track of Sinclair's model numbers, it's probably a > SD318-HF2P2SNM, > > previously known as a SRL310C8NM*2-2. I can send you the > sweep anyway if > > you want it. It talks extremely well. > > > > --- Jeff WN3A > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.0.238 / Virus Database: 270.11.3/1970 - Release > Date: 03/21/09 17:58:00 > > >
