Dan; They are quite useable on 927/902. You need to have the reference oscillator which there was one for every 5 stations.. I hope you have it???
Anyhow.. I wrote some Atmel code for a PLL loader for it. If you want to build a loader you can take control of the PLL. The GETC is a sideline issue but could have an AEGIS prom put in it for digital voice if you were so inclined... There are 2 on the air for sure that I ma aware of... and one other in the works.... that I have spoken to the owner of. I have a schematic for the loader. It interfaces to the PLL control leads in the exciter door... It monitors Lock detect as well as loads words for the rx and tx... If you are interested in none of the above.. I would like to talk about getting ownership and custody :-) Doug KD8B At 07:37 PM 3/26/2009, you wrote: >Is there any good use for a 900MHZ MASTR II? I have one with the >GETC controller attached. I have looked over all the info I can find >and do not see a good way to make this thing work on the ham band. >My question is, Is the repeater junk other than the PA? I have a >MSF-5000 on 902 and that was a breeze. Just wondering before I start >junking it out to make room in my garage for the other 4 MASTR II >repeaters I picked up. They are all VHF and UHF. >Thanks Dan > >
