You are correct. We now have copies of BOTH the Maxon software AND the GE software. The GE software requires the parallel port.
From: [email protected] [mailto:[email protected]] On Behalf Of Maire-Radios Sent: Wednesday, April 08, 2009 10:50 AM To: [email protected] Subject: Re: [Repeater-Builder] GE Monogram radios - follow-up never had any Maxon program cables that used a parallel port. ----- Original Message ----- From: Mark <mailto:[email protected]> To: [email protected] Sent: Wednesday, April 08, 2009 11:42 AM Subject: RE: [Repeater-Builder] GE Monogram radios - follow-up OK, thanks - the GE software we now have requires the parallel port, so it appears that we either need to rewire the plug (and/or use a gender bender) or get the GE cable. From: [email protected] On Behalf Of Maire-Radios also the plug you show for the computer goes to the serial port. you may need to get a 25 pin to 9 pin but it is NOT a parallel hook up.
