Hi all, Thanks for the group it has helped me out a bunch. My system here is a Kenwood TRK K2 and Telwave TPRD-1556 6 can set. Feed line is Heliax LDF4-50A about 70 feet and the antenna is a Diamond F22 that has been worked over and sealed up better.
The system is new and today I added a Telwave Isolator to the PA output before the duplexer TX input. With my meter I got about 28 watts out of antenna side of the duplexer set when connected to my antenna with out the isolator. With the Isolator I am getting about 26 watts out now. This seems good to me but I am new to an Isolator. Putting the meter between the isolator and the dummy load it is showing around 1.6 watts going to the dummy load. Just want to see if this is ok for this? KB7DZR Scott
