Henry Harms wrote: > OK, I was thinking of how our Micor is setup. So I'm guessing that the > mods need to be made to both radios to get the connections for the > controller to the J1 connector, and I will need two Xcat modules for the > freqs? Seems like a terrible waste of a good radio. Thanks, I appreciate > the help. Henry
That's the way I think too. Putting a radio that has a large channel capability into an application where it will be sitting on one channel all the time is quite a waste to me too. Having said that, the rx's in the Syntor and SyntorX are good rx's, both sensitive and selective, although the X is not quite as selective...but will still beat the pants off of any made-for-ham stuff, and most commercial made-for-repeater stuff! > kb0nly wrote: >> >> >> You cannot make a repeater out of a single Syntor X, they are not able >> to be duplexed. You need a PAIR of Syntor X's to make a repeater. One >> being the receiver, one being the transmitter. So then the receive >> antenna connection just goes to the front of the receive radio. >>
