Thanks Dave, I have seen several models like this.  The Antenna Factory,
Diamond, Comet, Austin, and others sell what looks like the same antenna.
Not to say that these antennas are no sturdy, but I have to considered
survivability a major factor.  The Tampa Bay area of Florida is considered
the lightning capital of the United States. The other concern and in no
particular order of concern is the fact that we are close to the Gulf of
Mexico which has been know to be a breading ground for those pesky
hurricanes.  Somehow I am looking for something just a little more durable
or that at least has the PERCEPTION of durability.  And that probably means
spending a good deal more for an antenna.  Lastly, I would not be able to
add an overheard support since this is not a tower side location rather a
roof top install. This may eliminate some other models which have noted
problems in high winds.  - Mike

 

From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of David Struebel
Sent: Tuesday, June 02, 2009 7:52 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re:Looking for 220 Repeater Antenna

 






If you go to this site on the Repeater Builder web page there is a very nice
and inexpensive fiberglass antenna for 220 MHz.  I'm running one on my
repeater without issues.

Antenna is made by Tram.

 

http://www.repeater-builder.com/products/220antennas.html

 

73 Dave WB2FTX

 

 

 

----- Original Message ----- 

From: Roger White <mailto:rwhitete...@verizon.net>  

To: Repeater-Builder@yahoogroups.com 

Sent: Tuesday, June 02, 2009 6:43 AM

Subject: Re: [Repeater-Builder] Re:Looking for 220 Repeater Antenna

 

I ordered a dB224JJ from Hutton Communications a number of years ago. It
sounded like they had not built one in quite awhile, but they did build one
for our club at Texas Instruments. I remember it took a number of months do
the antenna, indicating it was not in stock at the time of the order. It was
not cheap, in the $500 to 700 range. I would call them and see if they would
do a special.

 

www.huttononline.com

2520 Marsh Ln

Carrollton, Texas 75006

972 417-0100

 

Roger W5RDW

Murphy, Texas

----- Original Message ----- 

From: Tim and Janet <mailto:kb2...@gmail.com>  

To: Repeater-Builder@yahoogroups.com 

Sent: Monday, June 01, 2009 10:19 PM

Subject: [Repeater-Builder] Re:Looking for 220 Repeater Antenna

 

We are currently using a G7-220 on our repeater.  We did have problems with
the first one we put in the air.  The current one is also supported near the
top with a standoff to help stabilize it.  We too have been in search of a
better antenna for this band.  The DB224-JJ is difficult at best to find
used.  They and most other commercial manufacturers no longer supply them.
The ones that do are priced at well over $1000.  If anyone has a good one to
sell please let me know.  Maybe if we could get a order of several at one
time we could convince them to do a production run for us as long as the
price is reasonable.

 

Tim

N4CKV repeater

 

 

----- Original Message ----- 

From: Repeater-Builder@yahoogroups.com 

To: Repeater-Builder@yahoogroups.com 

Sent: Monday, June 01, 2009 9:38 PM

Subject: [Repeater-Builder] Digest Number 6746[1 Attachment]

 

 
<http://groups.yahoo.com/group/Repeater-Builder;_ylc=X3oDMTJjbXUwbWdlBF9TAzk
3MzU5NzE1BGdycElkAzEwNDE2OARncnBzcElkAzE3MDUwNjMxMDgEc2VjA2hkcgRzbGsDaHBoBHN
0aW1lAzEyNDM5MTAzMjQ-> Repeater Builder 

 

Re:
<http://groups.yahoo.com/group/Repeater-Builder/message/91793;_ylc=X3oDMTJxZ
Gg3OGo0BF9TAzk3MzU5NzE1BGdycElkAzEwNDE2OARncnBzcElkAzE3MDUwNjMxMDgEbXNnSWQDO
TE3OTMEc2VjA2Rtc2cEc2xrA3Ztc2cEc3RpbWUDMTI0MzkxMDMyNA-->  Looking for 220
Repeater Antenna 

 

 

 


Posted by: "James Adkins" adkins.ja...@gmail.com
<mailto:adkins.ja...@gmail.com?subject=%20re%3a%20looking%20for%20220%20repe
ater%20Antenna>    kb0nhx  <http://profiles.yahoo.com/kb0nhx> 


Mon Jun 1, 2009 9:27 am (PDT) 




If you can find an Andrew DB224-JJ for the 220 ham band, that'd be ideal on
the used market.

Our club is using another discontinued Andrew product, a DB-573-EE. It's a
3 dB fiberglass omni. It's spec'd for 217-222 MHz, but we use it for
222.680 receive and 224.280 for TX and it sweeps and works fine. See
www.nixahams.net and click on the "repeaters" link on the left for more
info.

73,

James Adkins, KB0NHX

 

Error! Filename not specified.

  _____  


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.339 / Virus Database: 270.12.50/2150 - Release Date: 06/02/09
06:47:00





__________ NOD32 4122 (20090602) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com

Reply via email to