Clarification: I used Advanced Receiver Research Products.
On Thu, Jun 11, 2009 at 12:33 PM, DCFluX<[email protected]> wrote: > I just used a preamp and a power divider with an Type N Male-Male > adapter between the two. They have 2 and 4 port power dividers. > > On Thu, Jun 11, 2009 at 12:27 PM, Steve Allred<[email protected]> wrote: >> >> >> The impedance of a CATV amp / splitter is 75 ohms, plus they usually have a >> higher noise floor. >> >> Steve / K6SCA >> >> --- On Thu, 6/11/09, Kris Kirby <[email protected]> wrote: >> >> From: Kris Kirby <[email protected]> >> Subject: Re: [Repeater-Builder] VHF RX Splitter Needed >> To: [email protected] >> Date: Thursday, June 11, 2009, 3:03 AM >> >> On Wed, 10 Jun 2009, Com-Rad Inc wrote: >>> Looking for a VHF antenna splitter 2 or 4 port ( internal amp ) >>> Similar or identiacl to M/A Com[nc3=3] RC-150-4 Could use 2 of >>> these Ed Folta K9QPJ >> >> Use a cable-TV amp and a hybrid/splitter. >> >> -- >> Kris Kirby, KE4AHR >> Disinformation Analyst >> >> >> >> >
