That's the most-likely cause (wrong input).
Other thing is that once the squelch opens, it will no longer auto-hunt if
memory serves. Make sure the squelch is closed (and, if you haven't
already, make sure you're on FM DEMOD in the AF Analyzer screen).
--- Jeff
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of DCFluX
> Sent: Friday, June 19, 2009 2:58 PM
> To: [email protected]
> Subject: Re: [Repeater-Builder] HP8924C RF Analyzer scan
>
>
>
> Make sure you have the RF Input field set to the right connection, RF
> I/O or Ant and leave the tune mode on auto.
>
> Be sure to save settings to POWERON when done.
>
> On Fri, Jun 19, 2009 at 7:17 AM, james a
> fosse<[email protected]
> <mailto:jafconsulting%40verizon.net> > wrote:
> > Hello,
> >
> > I just received a HP8924C Monday. Wednesday, I was able to
> get the RF
> > Analyzer to scan frequencies and lock onto the
> transmitter output. I changed
> > something and can no longer get the RF analyzer section to
> scan. It just
> > stays at the frequency set in the "tune frequency" box. It
> does not matter
> > whether the "tune mode" is set to auto or manual.
> >
> > Can anyone help me find the setting that I changed and restore it?
> >
> > regards,
> >
> > jim fosse
> > KI6NJF
> >
> >
> >
> >
> > ------------------------------------
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.339 / Virus Database: 270.12.61/2167 - Release
> Date: 06/19/09 06:53:00
>
>
>
