Yes. I have 2 front ends to work with. Both showed around .3uv or so @ 46.xxmHz
Chris, Kb0wlf > -----Original Message----- > From: Repeater-Builder@yahoogroups.com [mailto:Repeater- > buil...@yahoogroups.com] On Behalf Of Joe > Sent: Friday, June 26, 2009 3:45 PM > To: Repeater-Builder@yahoogroups.com > Subject: Re: [Repeater-Builder] MastrII Receiver Failure > > Did you first test it on it's original frequency before you retuned it? > It may have had a problem from the start. > > Years ago, I tuned over 25 MastrII radios I got from the local state > police to 52.525Mhz as a project. Probably 2 or 3 of them would just > not tune up properly in the ham band. They are only specked out to > 50Mhz, some may work above that frequency and a few may not. I kept my > bad ones for spare parts. You may have one that just won't go above > 50Mhz. You can mod the one you have, or just buy another front end > assembly. I definitely would first test it at it's original frequency > before I did any mods. > > 73, Joe, K1ike > > > Chris Curtis wrote: > > I have a mastr EXEC II receiver (33 split) that I can't get > sensitivity to > > increase. > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.12.83/2191 - Release Date: > 06/26/09 05:53:00
